|
Developed jointly with the Edward Orton, Jr. Ceramic Foundation, the patented
Skutt EnviroVent2 is a truly effective kiln venting system.
Removes fumes, odors, vapors.
The EnviroVent2 draws out firing odors and vents them outdoors before they enter the studio or classrooms atmosphere. It's great for firing lusters, metallics and high sulfur clays.
The EnviroVent2 creates a down draft effect which greatly improves kiln temperature
uniformity. You can now fire loads with reds at the top of the kiln and greens on the bottom with excellent results.
The EnviroVent2 fits Skutt 12, 10 and 8-sided kilns, as well as many other kiln brands.
The EnviroVent2 makes firing kilns such as the Skutt KM series much more convenient. There's no lid propping. Just put plugs in all the peepholes and press Start.
The EnviroVent2 pulls fumes from the kiln before they can enter the room. It's compact and unobtrusive--no pulleys, no counterweights, no overhead installation. Flexible ducting lets you move kilns around the room. And the air-cooled motor will not overheat from normal firings.
The EnviroVent2 is UL listed when installed with a Skutt kiln bearing the UL mark and
meets standard building codes in most jurisdictions.
SPECIFICATIONS
Motor: 115 volt 1.1 amps 0.18 horsepower
Heat exiting blower: 160° F maximum
Static pressure: 0.2 inches
distances greater than 60 ft: 0.4 inches
Blower: 60-80 cfm
distances greater than 60 ft: 60 cfm
Maximum kiln capacity for use with EnviroVent 2: 14 cubic feet
|
|
